How to Sight In a One Pin Bow Sight: A Step-by-Step Guide
Learn how to sight in a one pin bow sight with a clear step-by-step process covering setup, distance marks, pin tuning and fine adjustments for accurate shots.
Updated November 2026
Learning how to sight in a one pin bow sight means setting a single pin so that your arrow lands where you aim at a set distance. Once it is done, you will know which pin position to use at each yardage you practice from. The process is simple, but it rewards patience and a stable shooting form.
Before You Start: Set Up the Basics
A sight only works if the bow itself is set up correctly. Check that the riser is level, the nocking point is in place, and the arrow rest is adjusted so the arrow flies straight. Most manufacturers specify a sight mounting position in their instructions, so follow those numbers first. For help with the measuring side, see Single Pin Bow Sight Tape: How to Set Up and Use One Correctly.
Shopping for one? See our guide: Bow Sights with Rangefinder: 5 Best Picks Compared (2026).
- Bow with the draw length and draw weight you will shoot at all times
- Stable target stand or bag, with a backstop
- Target face at a known distance, starting at 20 yards
- Arrows that are matched in spine and length
- Allen wrenches, a bow square and a tape measure
- Pin or sight tape marked for your distance settings
Step-by-Step: Sighting In Your One Pin Sight
Step 1: Set Your Anchor and Form
Draw the bow to your normal anchor point and hold it steady. Your sight will only be accurate if your anchor is the same every time. Use a consistent release and follow through.
Step 2: Shoot at 20 Yards
Aim the pin at the center of the target and shoot three to five arrows. Look at the group, not individual arrows. If the group sits high, lower the pin. If it sits low, raise it. If it sits left or right, adjust the windage on the sight housing.
Step 3: Make Fine Adjustments
Move the pin in small increments, usually a quarter turn of the adjustment screw at a time. Shoot another group after each change, and never make two adjustments before checking the result. Once the group is centered, mark the setting for that distance.
Step 4: Repeat at Other Distances
Move back to 30, 40 and 50 yards, or to the distances you actually shoot. At each distance, shoot a group and adjust until the arrows hit the center. Record the settings so you can return to them later.
| Distance (yards) | Action | Goal |
|---|---|---|
| 20 | Shoot 3–5 arrows, adjust vertical and windage | Centered group |
| 30 | Shoot 3–5 arrows, fine-tune pin | Centered group |
| 40 | Shoot 3–5 arrows, record setting | Centered group |
| 50 | Shoot 3–5 arrows, record setting | Centered group |
Tips and Common Mistakes
- Do not chase single arrows. Judge your adjustments by the group.
- Shoot from the same spot and stance every time, or your results will drift.
- Check that the sight bracket and pin are tight after each session.
- Let your form settle before adjusting. Fatigue causes inconsistent shots.
- If the group will not center, check the arrow rest and nock point before changing the sight.
Recommended Gear
A bow square helps you confirm that the sight is level and square to the bow, which keeps your adjustments meaningful. View on Amazon
A sight tape or yardage marker lets you record settings for each distance so you can return to them quickly. View on Amazon
FAQ
How often should I re-sight my one pin bow sight?
Check your sight whenever you change arrows, string, draw weight, or after a long break. Many archers also do a quick check at the start of each season.
Can I sight in a one pin sight indoors?
Yes. Indoor ranges work well for initial setup because the distances are fixed and the lighting is consistent. Outdoor conditions such as wind may still require fine tuning later.
Do I need to adjust the sight after changing my draw length?
Usually, yes. A change in draw length changes arrow speed and point of impact, so re-sight at each distance after the change.
Conclusion
Sighting in a one pin bow sight comes down to a consistent anchor, a few groups at set distances, and small, careful adjustments. Record your settings so you can return to them easily. If you are unsure about your bow setup, consider asking a qualified archery pro shop for a check.
Related reading
- What Is a Sight Master Bow Sight and How Do You Set One Up?
- What Is a Dead Ringer Bow Sight and How Do You Use One?
- Universal Bow Sight Magnifier Lens: How to Choose and Use One (Step by Step)
- Trophy Ridge Bow Sight Light: How to Choose and Use One Right
- Triple Stack Bow Sight: How to Set Up and Sight In a Three-Pin Sight
Ready to choose one?
