Apex Covert Bow Sight: Setup, Sight Pin Tuning and Tips for Beginners
Learn how the apex covert bow sight works, how to set it up and tune pins for accurate shots, plus common mistakes to avoid. A clear guide for new archers.
Updated November 2026
An apex covert bow sight is a compound bow sight designed to keep the sight window and pin housing out of the way while you aim, so you can build a consistent anchor and sight picture. This guide walks you through what to check before you mount it, how to set your pins, and how to tune for distance. By the end, you will have a sight that holds its zero shot after shot.
What the Apex Covert Bow Sight Does Differently
Most sights mount on a single bracket and place pins in front of the riser at a fixed height. The apex covert bow sight uses a low-profile housing that sits closer to the bow, which many archers find reduces snagging on clothing and keeps the sight from shifting during a draw. Check your bow’s riser threads and mounting holes before buying, since the bracket must match your riser. Manufacturers typically specify the mounting pattern and maximum sight-to-string clearance, so confirm both against your bow’s specs.
Shopping for one? See our guide: Bow Sights with Rangefinder: 5 Best Picks Compared (2026).
Step 1: Mount the Sight Securely
Attach the sight bracket with the bow unstrung or in a bow stand. Use a torque wrench if the manufacturer lists a torque value, and avoid overtightening, which can strip threads or warp the housing. Set the sight so the pin guard is centered over the arrow path, then check that the sight window clears the string at full draw.
- Confirm the bracket matches your riser’s mounting holes.
- Snug all bolts evenly, then torque to the manufacturer’s value.
- Check string and cable clearance at full draw.
- Verify the sight moves freely on its adjustment slides without binding.
Step 2: Set Your Pins for Distance
Start by shooting at a known distance, such as 20 yards, with your anchor and release kept identical each shot. Group five to six arrows, then adjust the pin until the group centers on the bullseye. Repeat at 30 and 40 yards, marking each pin position on the sight tape or with a label. Keep the same anchor point throughout, because even a small change in your anchor will shift your impacts.
Tips for Accurate Pin Tuning
Shoot from a stable, level stance, and let each group settle before you adjust. If your arrows walk left or right, check your nock tuning and paper-tune your arrows before changing pins, since a bow that is out of tune will fool you into chasing the wrong fix. Our article Why Do Archery Attack Bows and Arrows Miss? 6 Causes and Fixes covers the most common tuning problems in detail.
Step 3: Fine-Tune and Log Your Settings
Once your pins are set, shoot a short session at each distance and confirm the groups hold. Write down each pin setting and the conditions you shot in, including wind and temperature, since both affect arrow flight. Re-check your pins after changing arrows, string, or draw length, because any of these can shift point of impact. For setup questions that go beyond sight pins, the related guide Garmin Rangefinder Bow Sight: Setup, Calibration and Use Guide shows how sight calibration works on a different sight type.
Common Mistakes to Avoid
- Changing your anchor point between shots, which moves your groups every time.
- Tuning pins before the bow is properly tuned.
- Overtightening the mounting bolts and stripping threads.
- Skipping a string-clearance check after remounting the sight.
- Failing to log settings, so you have to re-learn your distances each season.
Recommended Gear
A torque wrench helps you tighten sight bolts to the manufacturer’s value without stripping threads. View on Amazon
A sight level helps you confirm the pins are vertical before you start tuning. View on Amazon
FAQ
Do I need a special tool to mount an apex covert bow sight?
Most mounts need only a hex key set, though a torque wrench is useful if the manufacturer gives a torque value. Check the instructions that came with your sight for the exact tools needed.
How many arrows should I shoot per group when setting pins?
Five to six arrows per distance gives you a reliable group to read. Shoot them from the same anchor and release to keep the results consistent.
Should I re-tune my pins every time I change equipment?
Yes, change in arrows, string, draw length or nock point can shift your impacts. Re-check your groups at each distance before relying on the settings.
Conclusion
A well-mounted apex covert bow sight, set with a consistent anchor and logged pin positions, gives you repeatable accuracy at each distance. Tune your bow first, then set pins one distance at a time. Keep notes, and recheck after any equipment change.
Related reading
- Traditional Bow Arrow Rest: 7 Best Picks Compared for 2026
- Top 7 Archery Bow Arrow Rest Options Compared for Recurve and Compound Bows
Ready to choose one?
