Apex Gear 3 Pin Bow Sight: Setup and Sight-In Guide for Beginners
Learn how to set up and sight in an apex gear 3 pin bow sight, with step-by-step tuning, common mistakes to avoid and tips for consistent groups.
Updated November 2026
An apex gear 3 pin bow sight gives you three fixed aiming points, each set for a different distance. This guide walks you through mounting the sight, setting pin gaps, sighting in at known distances and checking your work so your groups stay tight from the range to the field.
What You Need Before You Start
Sighting in goes faster and more accurately when you have the right tools and a stable shooting setup. Gather these items before you touch the bow:
Shopping for one? See our guide: Bow Sights with Rangefinder: 5 Best Picks Compared (2026).
- A level and a stable target at 20 yards
- Hex keys or the wrenches supplied with the sight
- A bow press or a bench rest, if you have one
- At least 12 to 15 arrows with matching spine and weight
- A bubble level that attaches to the sight or the bow
- A tape measure or range markers at 20, 30 and 40 yards
Mount the Sight Correctly
Attach the sight bracket to the riser using the mounting holes your bow manufacturer specifies. Keep the bracket snug but not fully torqued until alignment is finished, so you can make small adjustments.
- Set the sight so the pin housing sits in line with your string and arrow when you draw.
- Level the sight bar using the bubble level. A tilted sight shifts your groups left or right.
- Check that the sight can slide or rotate without binding. Loose mounting hardware causes drift later, so tighten everything once you have aligned the bar.
Set Pin Gaps and Sight In at Known Distances
Most 3 pin sights come with the pins fixed at factory gaps, but you should still verify them at your draw length and draw weight. Start at 20 yards because it is the easiest distance for a first sight-in.
Step 1: Sight in the top pin at 20 yards
Shoot three arrows from a steady stance, aiming at the center of a 20-yard target. Adjust the top pin until the group lands where you aim, then lock the pin in place.
Step 2: Set the middle and bottom pins
Move to 30 yards and adjust the middle pin, then to 40 yards for the bottom pin. Shoot at least three arrows at each distance before you change anything, because one or two shots rarely show your true group.
| Pin | Typical distance | What to check |
|---|---|---|
| Top pin | 20 yards | Group centered on the aim point |
| Middle pin | 30 yards | Group centered, not drifting left or right |
| Bottom pin | 40 yards | Group consistent with your shooting form |
Check Your Work and Fine-Tune
After the pins are set, shoot a few groups from each distance to confirm your settings. Your arrows should land in a tight cluster around the pin’s aim point. If they spread widely, your form or release is the likely cause, not the sight. For help with rest and nock alignment, see How to Adjust Arrow Rest on Compound Bow: A Step-by-Step Guide. If you use a rangefinder, Garmin Rangefinder Bow Sight: Setup, Calibration and Use Guide explains how to pair one with a fixed-pin sight.
Common Mistakes to Avoid
- Sighting in with a sight that is not level, which shifts all three pins
- Adjusting pins after one or two arrows instead of a full group
- Changing your draw length or anchor point without resetting the pins
- Tightening mounting screws before alignment is finished
- Ignoring a bow that shoots inconsistently; check tuning first with Why Do Archery Attack Bows and Arrows Miss? 6 Causes and Fixes
Recommended Gear
A bubble level that clips onto the sight bar helps you keep it square during setup and after any adjustment.
A bow press or sturdy bench rest keeps the bow steady while you adjust the pins, which reduces setup errors.
A bow-mounted arrow rest matched to your arrow spine improves group consistency once the sight is set.
FAQ
What distances should I use to sight in a 3 pin bow sight?
Most archers start at 20 yards for the top pin, then 30 and 40 yards for the middle and bottom pins. Use the distances that match how you plan to hunt or shoot.
How many arrows should I shoot before adjusting a pin?
Shoot at least three arrows at each distance and look at the group, not a single shot. Make adjustments only after a consistent pattern appears.
Do I need to re-sight my apex gear 3 pin bow sight after changing arrows?
Yes. A different arrow weight or length changes your arrow flight, so re-check all three pins. Consult your archery shop or bow manufacturer if you are unsure how a setting affects your setup.
Conclusion
An apex gear 3 pin bow sight works best when it is level, properly mounted and sighted in at known distances. Take your time with each pin, shoot full groups and check your form before blaming the sight. With steady practice, your three pins will give you reliable aim points.
Related reading
- Apex Gear Arrow Rest Options: 6 Best Picks Compared (2026)
- Traditional Bow Arrow Rest: 7 Best Picks Compared for 2026
Ready to choose one?
