We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Traditional Leather Back Quiver: A Step-by-Step Guide for Beginners

Learn how to choose, fit and set up a traditional leather back quiver for target archery, with steps for arrow height, strap fit and everyday care.

Updated November 2026

A traditional leather back quiver holds your arrows at your back, where they stay out of the way of your bow arm and draw hand. This guide walks you through choosing a traditional leather back quiver, fitting it to your body, setting the arrow height and keeping the leather in good shape. Most new archers can get a comfortable, reliable setup in one session.

Choose the Right Style for Your Shooting

Traditional back quivers come in a few common designs. A simple open-top tube quiver is the most basic and works well for target shooting with a few arrows. A quiver with a flap or cover keeps rain and debris off the fletching, which matters if you shoot outdoors. Some designs have a belt loop or a separate waist strap, while others rely only on shoulder straps. Before buying, count how many arrows you normally carry and check that the quiver’s capacity matches that number with room to spare.

Shopping for one? See our guide: Bear Archery Traditional Back Quiver Review (2026).

Fit the Quiver to Your Body

A quiver that fits well sits high enough on your back that the arrows do not rub your hip or catch on your clothes during the draw. Put the quiver on as you would for shooting, then reach over your shoulder and draw an imaginary string. If your elbow hits the arrows or the tips poke your shoulder, adjust the position.

Steps for a Basic Fit

  1. Put the quiver on with the arrows loaded, fletching facing up or slightly forward.
  2. Tighten the shoulder straps until the quiver rests against the middle of your back without swinging.
  3. Adjust the waist strap, if your model has one, so the quiver does not shift when you bend or walk.
  4. Go through a full draw and release, watching for contact between the arrows and your bow arm or clothing.
  5. Re-check the fit after a few shots, because leather stretches slightly with use.

Set the Arrow Height and Retention

The arrows should sit high enough that you can grip the shaft without bending down, but not so high that the nocks rise above your shoulder. Many archers find that the fletching should be roughly level with the top of the shoulder when the quiver is in place. Check that the arrows stay put when you walk, bend and run your hand over the quiver. If they slide out or rattle, look at the retention system. Some quivers use a tight leather throat or a keeper strap. Adjust these so the arrows are snug but still easy to pull out with one hand.

Care for the Leather

Leather lasts for years when you keep it dry and clean. Wipe off dirt after shooting and let the quiver air-dry if it gets wet, away from direct heat. Apply a leather conditioner sparingly every few months, and avoid soaking the leather or storing it in a hot car. Check the stitching and rivets periodically, since a loose seam can cause arrows to fall out at the worst moment. For major repairs, consult a qualified leatherworker.

Common Mistakes

  • Choosing a quiver that holds fewer arrows than you actually shoot.
  • Setting the quiver too low, which makes the arrows hard to reach smoothly.
  • Overtightening the straps, which can pinch and restrict the draw.
  • Storing the quiver damp, which can stiffen and stain the leather.
  • Ignoring loose stitching until an arrow falls out during a shot.

A quality leather conditioner helps keep the quiver supple and prevents cracking over time. View on Amazon

A spare set of arrow nocks or a replacement arrow retention strap is useful if your quiver’s fittings wear out. View on Amazon

For more on how quivers fit with other archery equipment, see What Holds Arrows in Archery: Quivers, Arrow Rests and Holders Explained and Leather Archery Back Quiver: A Step-by-Step Guide to Choosing and Setting One Up. Archers who shoot from horseback should also read Mounted Archery Back Quiver: How to Choose and Fit One for Horseback Shooting, and younger archers may find Youth Archery Back Quiver: A Step-by-Step Fitting and Setup Guide useful.

FAQ

How high should a traditional leather back quiver sit?

Most archers set the quiver so the fletching sits about level with the top of the shoulder. Adjust from there based on how the arrows feel during a full draw.

How often should I condition the leather?

Conditioning every few months is a common routine, plus a cleaning after wet or dusty shooting. Apply it sparingly and let it soak in before use.

Can a leather back quiver be repaired?

Loose stitching and worn rivets can often be fixed by a leatherworker. For structural damage, ask a qualified professional before continuing to rely on the quiver.

Conclusion

A well-fitted traditional leather back quiver keeps your arrows secure, reachable and out of your shooting path. Set the style for your shooting conditions, fit the straps and arrow height to your body, and keep the leather clean and conditioned. Recheck the fit and hardware every few sessions to keep your setup reliable.

Lauren Holland

About Lauren Holland

Lauren Holland is part of our editorial team and reviews and edits our target archery guides, checking product details against manufacturer specifications and owner feedback.

About the author

Lauren Holland
Lauren Holland

Lauren Holland writes reviews and buying guides for Archery Society.