Battery for Bow Sight: How to Choose, Replace and Maintain It (Step by Step)
Learn how to pick the right battery for a bow sight, replace it safely, and keep it running longer, with steps for lithium and button-cell types.
Updated November 2026
A battery for bow sight is usually a small coin cell that powers the illuminated pin or dot in your sight. This guide explains how to identify the correct battery type, replace it without damaging the sight, and extend its life so you are not caught with a dim aiming point before a shoot or hunt.
Identify the Correct Battery Type
Most illuminated bow sights use a button-style lithium coin cell, commonly a CR2032 or a similar size. Sight manufacturers print the required battery size in the owner’s manual and often on the battery compartment itself. Check that documentation before buying, because some lighted sights use a different cell or a rechargeable pack.
Before you replace anything, confirm the battery is the problem. If the light is weak only in bright conditions, it may be a brightness setting rather than a dead cell. Many sights offer multiple brightness levels, so cycle through them first.
Replace the Battery Step by Step
Changing the cell takes only a few minutes, but work carefully. Small screws and seals are easy to lose or cross-thread.
- Set the bow down on a padded surface and lay a clean towel under the sight.
- Turn the sight off and locate the battery cap, usually on the side or rear of the housing.
- Unscrew the cap slowly and remove the old battery, noting its orientation (positive side usually faces up).
- Wipe the contacts with a dry cloth. Do not use metal tools to pry the cell out.
- Insert the new battery with the same orientation and confirm the light turns on.
- Reseat the cap, tighten it until snug without forcing it, and check the O-ring is in place.
Test the sight at several brightness levels before you shoot. If the light flickers, the cap may not be seated fully, or the contacts may be bent.
Extend Battery Life and Avoid Problems
Lighted sights are designed to be used with the illumination off when you are not aiming in low light. Turning the light off between sessions, rather than leaving it on at the highest setting, is the simplest way to stretch battery life. Lower brightness settings also draw less current.
Store the bow in a moderate temperature. Cold weather reduces the output of lithium cells, so a sight that looks dim on a cold morning may recover as it warms up. Keep spare cells in a dry case, away from keys and coins, to prevent accidental short circuits.
Seal integrity matters too. A cracked or missing O-ring can let moisture reach the electronics, which causes corrosion and failure. Inspect the cap seal when you change the battery, especially after rain or humid weather.
Recommended gear
A spare lithium coin cell in the correct size is the most useful item to carry in your bow case, so you can swap it on the range without waiting for a store trip. Keep a small pair of soft-tip tools or a plastic trim tool on hand for cap removal, since metal tools can scratch the housing. A small silicone O-ring kit matched to your sight is also helpful for replacing a worn seal.
Common Mistakes
- Installing the cell with the wrong orientation, which prevents the light from working.
- Overtightening the battery cap, which can crack the housing or damage the threads.
- Leaving the light on at full brightness during storage or long practice sessions.
- Ignoring a damaged O-ring and allowing moisture into the sight.
- Assuming a dim light is a dead battery when a brightness setting or cold temperature is the cause.
For context on how the sight fits into your overall setup, see Garmin Rangefinder Bow Sight: Setup, Calibration and Use Guide and Bow Sights with Rangefinder: 5 Best Picks Compared (2026). If your sight aim seems off after a battery change, Why Do Archery Attack Bows and Arrows Miss? 6 Causes and Fixes covers other common causes.
FAQ
What battery does a bow sight use?
Most lighted bow sights use a button-style lithium coin cell, often a CR2032. Check the owner’s manual or the label inside the battery compartment for the exact size.
How often should I replace the battery in a bow sight?
There is no fixed schedule because use, brightness setting and temperature all affect battery life. Replace the cell when the light dims noticeably at your normal setting, and keep a spare on hand.
Can I use a rechargeable battery in my bow sight?
Only if the manufacturer lists it as compatible, since voltage and size can differ from a standard lithium cell. If you are unsure, consult the sight manufacturer before making a change.
Conclusion
Choosing the correct battery, replacing it carefully and managing brightness will keep your bow sight reliable. Keep a spare cell and check the seals periodically. If the sight still fails after a fresh battery, contact the manufacturer for service guidance.
Related reading
- Traditional Bow Arrow Rest: 7 Best Picks Compared for 2026
- Top 7 Archery Bow Arrow Rest Options Compared for Recurve and Compound Bows
Ready to choose one?
