We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Hind Sight Bow Sight: How to Set Up and Use One for Target Shooting

Learn how a hind sight bow sight works, how to set it up for target archery, and how to avoid common aiming mistakes. A clear beginner's guide.

Updated November 2026

A hind sight bow sight is a simple aiming aid that sits on the riser of a bow and lets you see your arrow’s position in relation to the target. Set up correctly, it gives you a repeatable reference point so you can aim the same way every shot. This guide covers what a hind sight is, how to set it up, and how to tune it for target shooting.

What a Hind Sight Bow Sight Does

A hind sight is a sight pin or aperture positioned behind the arrow, usually on the bow’s riser near the grip. Instead of aiming through a pin that sits in front of the arrow, you look back toward the string and use the sight’s alignment to line up your eye, string and target. Many traditional and recurve archers use this style because it keeps the bow simple and the setup quiet. For a broader look at sight types, see Bow Sights with Rangefinder: 5 Best Picks Compared (2026).

Setting Up Your Hind Sight Step by Step

Start with a properly tuned bow. A sight will not fix a bow that is out of tune, so confirm your arrow is flying straight before you touch the sight.

  1. Mount the sight on the riser at the height recommended by the manufacturer, normally at the same level as your anchor point.
  2. Draw the bow to your normal anchor and check that your eye sits at the sight’s aperture or line of sight without strain.
  3. Shoot a group of three arrows at a target placed 10 yards away, then note where they land.
  4. Adjust the sight horizontally to correct left or right groups, and vertically to correct high or low groups.
  5. Repeat at 20 yards, then at your primary shooting distance, making small adjustments each time.

Make changes in small increments. Moving the sight a long way at once usually overshoots the correction and wastes arrows.

Tuning for Consistent Aim

Consistency comes from a repeatable anchor and release. Use the same anchor point, the same draw length and the same release on every shot. If your anchor drifts, your sight picture changes and your groups will spread. Once your form is stable, the sight can do its job.

Checking Sight Alignment

Check alignment with the bow held vertically. The sight should be level with the riser and the string should pass cleanly through the sight’s reference line. If the sight is canted, your horizontal and vertical corrections will fight each other.

Common Mistakes

  • Adjusting the sight before the bow is tuned, which hides the real problem.
  • Changing anchor point between shots, which moves your sight picture.
  • Making large sight moves instead of small, measured corrections.
  • Tightening mounting screws too far and stripping threads or shifting the sight out of position.
  • Shooting at one distance only and assuming the setting will work at all ranges.

FAQ

Is a hind sight bow sight good for beginners?

It can be, because it encourages a steady anchor and a focus on alignment. Beginners should still get basic form and bow tuning right first, since a sight cannot compensate for poor technique.

How often should I check my hind sight setup?

Check it whenever you change arrows, string or draw length, and after any impact that could shift the sight. A quick group at 10 yards is usually enough to confirm alignment.

Can I use a hind sight for hunting?

Check your local hunting regulations and your sight manufacturer’s guidance before using any sight for hunting. Practice extensively at realistic distances before relying on it in the field.

A bow square helps you check that the sight and string are aligned during setup. View on Amazon

A bow stringer lets you safely string and unstring your bow when adjusting sight position or other components. View on Amazon

Conclusion

A hind sight bow sight gives you a simple, repeatable aiming reference when it is mounted and tuned carefully. Start with a tuned bow, adjust in small steps, and keep your anchor consistent. With practice, the sight will become a dependable part of your shooting routine.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our target archery guides, checking product details against manufacturer specifications and owner feedback.

About the author

Ethan Brooks
Ethan Brooks

Ethan Brooks writes reviews and buying guides for Archery Society.