We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Trophy Ridge Revolution Arrow Rest: Setup and Tuning Guide for Beginners

Learn how to set up and tune a Trophy Ridge Revolution arrow rest, from mounting and cable alignment to paper tuning, with tips for beginners.

Updated November 2026

The Trophy Ridge Revolution arrow rest is a drop-away style rest that holds your arrow in place at full draw and then drops it cleanly as the string leaves the cable. This guide walks you through mounting it, checking alignment, and tuning it so your arrows fly straight. Expect the full process to take an evening if you work carefully and make small adjustments.

Before You Start: Gather Your Tools and Check Your Bow

A clean, stable setup depends on having the right tools and a bow that is in good shape. Confirm that your riser, limbs and cams are undamaged and that your string and cables are not frayed.

Shopping for one? See our guide: Trophy Ridge Sync Arrow Rest: 5 Best Picks Compared (2026).

  • Hex (Allen) keys in the sizes that fit your rest and sight bracket
  • A bow square or ruler for measuring centershot and mounting height
  • A paper tuning target or a sheet of paper and a pole or frame to hold it
  • A bow press or a helper if you need to adjust the string or cables
  • Thread locker for screws that will see vibration

How to Mount the Trophy Ridge Revolution Arrow Rest

Start by attaching the rest’s mounting bracket to the riser’s arrow rest hole. Leave the screws loose so you can slide the rest up, down and in or out during tuning.

Set the Initial Height and Centershot

  1. Set the rest so the arrow sits about centered on the nock height you plan to use, typically around the shaft’s center line relative to the string.
  2. Measure from the riser to the arrow shaft with a bow square. Aim for a starting centershot position that matches your bow manufacturer’s specifications.
  3. Check that the rest’s arms and flipper will not contact the cable guard or string at full draw.

Align the Drop-Away Cable

The rest’s drop-away mechanism is triggered by the cable, so the cable path needs to be correct. Check that the cable runs freely and does not rub the rest body. Adjust the cable length or the cable guard position so the rest falls fully when you release.

Tuning the Rest for Straight Arrow Flight

Tuning turns a mounted rest into a reliable one. Paper tuning is the most common method for beginners because it shows how the arrow leaves the bow.

  1. Shoot an arrow through a sheet of paper held about three feet from the bow. Look for a clean tear with the fletching hole centered.
  2. If the tear shows the arrow tail high or low, adjust the rest’s height in small increments.
  3. If the tear shows the tail left or right, adjust the rest’s windage and check centershot again.
  4. Repeat at about six feet, and then shoot a group at 20 yards to confirm your arrows land together.

Make one change at a time and re-test after each. Small turns of a screw can produce large changes at the target.

Common Mistakes to Avoid

  • Tightening the mounting screws before tuning, which makes later adjustments hard.
  • Skipping the paper test and relying only on the bullseye.
  • Changing several settings at once and losing track of what worked.
  • Ignoring cable rubbing, which can cause inconsistent release.
  • Forgetting to re-check the setup after changing arrows or string.
  • Bow square: Helps you measure centershot accurately and check the rest’s position against the riser. View on Amazon
  • Paper tuning kit: Gives you a consistent target for checking arrow flight from close range. View on Amazon
  • Thread locker: Keeps the rest’s screws from loosening as the bow vibrates. View on Amazon

For more background on how this rest style compares with others, see Arrow Rest Trophy Ridge (2026): Pros, Cons & Verdict and Types of Arrow Rest: A Guide to Each Style for Archers. If you are installing a different drop-away model, Truglo Drop Away Arrow Rest Installation: 6 Steps for a Clean Setup covers similar steps. For general arrow holding options, What Holds Arrows in Archery: Quivers, Arrow Rests and Holders Explained explains the basics.

FAQ

Do I need a bow press to install this rest?

A bow press is not strictly required for mounting the rest itself, but it makes adjusting the string and cables safer and easier. If you do not have one, have an experienced archery shop or certified technician handle any string or cable work.

How often should I re-tune the rest?

Re-check tuning after changing arrows, broadheads, string or draw weight, and after any impact to the bow. Many archers also check it at the start of each season.

Why does my arrow still tear the paper high after setup?

A high tear usually means the rest is set too low or the nock point is off. Adjust rest height in small steps and re-test, and confirm your nocking point with a string loop if needed.

Conclusion

With the rest mounted, aligned and paper tuned, your arrows should leave the bow cleanly and group together at distance. Take your time with each adjustment and keep notes so you can repeat your settings. If something still feels off, a qualified archery pro can check your setup in person.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our target archery guides, checking product details against manufacturer specifications and owner feedback.

About the author

Ethan Brooks
Ethan Brooks

Ethan Brooks writes reviews and buying guides for Archery Society.