We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Schaffer Archery Opposition Arrow Rest: Setup Steps and Tuning Tips

Learn how to set up and tune a Schaffer Archery Opposition arrow rest, from mounting and centering to arrow tuning and common fixes for accurate shots.

Updated November 2026

The Schaffer Archery Opposition arrow rest is a drop-away style rest that holds your arrow on the shelf until release and then falls away from the arrow’s path. Setting it up correctly means mounting it at the right height, centering it on your riser, and tuning it so your arrows fly clean. This guide walks you through each step so you can get a repeatable setup on a compound or recurve bow.

What You Need Before You Start

Gather a few basic tools before you touch the bow. Working on a stable bench with the bow in a bow stand makes the job much easier, and it keeps you from scratching the riser.

Shopping for one? See our guide: 6 Best Quality Archery Designs Arrow Rests for Target Shooting (2026).

  • An Allen wrench set matching your rest’s mounting hardware
  • A bow square or ruler for measuring centershot and rest position
  • A paper tuning tool or bare-shaft tuning kit
  • Fresh, matched arrows cut to your draw length
  • A small amount of thread-locking compound for the mounting screws

If you are new to rests in general, it helps to review how the category works first. The article What Holds Arrows in Archery: Quivers, Arrow Rests and Holders Explained covers the basic terms you will see in the setup instructions.

Step 1: Mount the Rest and Set the Height

Attach the rest to the riser using the mounting holes that match your bow’s brand and model. Start with the rest at a neutral height, roughly level with the arrow’s center when nocked. Snug the screws enough to hold the rest but leave it movable so you can adjust it during tuning.

Next, set the vertical position so the arrow sits level on the shelf. Nock an arrow and look down the shaft from behind the bow. The arrow should appear parallel to the sight window or the riser, not tipped up or down.

Step 2: Center the Rest and Set Arrow Clearance

Lateral position controls how the arrow leaves the bow relative to the riser. Measure from the center of the arrow shaft to the riser when the arrow is on the rest. Many archers aim for a small, consistent gap between the arrow and the riser at full draw, and then fine-tune from there using the paper test below.

Keep the rest’s drop-away arm free of obstructions. Confirm that the arm moves freely and returns to its ready position after each shot. A sticky arm will throw arrows unpredictably.

Step 3: Tune the Arrow Flight

Tuning is where most setup problems get solved. Use the paper test: shoot an arrow through a sheet of paper stretched on a frame about three feet from the bow. A clean tear with the fletching slicing through the center means your arrow is flying straight. A tear with a fishtail pattern points to a rest or nock-point issue.

Adjusting for Common Tear Patterns

  • Tear high or low: Adjust the rest’s vertical position in small increments, then retest.
  • Tear left or right: Move the rest laterally toward the side the arrow is tearing toward.
  • Persistent tuning trouble: Check your arrow spine and point weight before adjusting the rest further.

Make one change at a time and retest after each adjustment. Writing down each setting lets you return to a known-good position if you go too far.

Step 4: Verify Timing and Clearance at Full Draw

Once paper tuning looks clean, shoot a few arrows at a target from a comfortable distance. Watch for arrows that hit the rest arm or fletching contacts the riser. Check that the drop-away releases cleanly after each shot. If the arm lags, look at the spring tension and the cable or cam timing on the bow.

Common Mistakes

  • Tightening mounting screws fully before tuning, which makes later adjustment frustrating.
  • Changing several settings at once and losing track of what helped.
  • Ignoring fletching contact because the paper test looked acceptable.
  • Skipping a check of the drop-away spring after the rest has been bumped or stored in a case.
  • Tuning with worn or mismatched arrows, which can mask the real rest problem.
  • Bow stand or padded bow vise: Holds the bow steady while you adjust the rest, protecting the finish. View on Amazon
  • Paper tuning kit: A frame and paper roll make the paper test quick and repeatable. View on Amazon
  • Bow square: Helps you check centershot and rest alignment against the riser. View on Amazon

FAQ

Do I need a bow press to install the Schaffer Opposition rest?

No. Mounting the rest only requires an Allen wrench and access to the riser holes. A bow press is only needed when you remove or adjust limbs, which this installation does not involve.

How often should I recheck my rest setup?

Check the setup after any bow transport, after changing arrows, and whenever the paper test starts showing new tear patterns. Routine checks catch loosened screws before they affect accuracy.

What if my arrows still tear badly after adjusting the rest?

Recheck your arrow spine, point weight, and nock fit before changing the rest again. Many persistent tears come from arrow setup rather than the rest itself. A local pro shop can help if the problem continues.

Conclusion

A properly mounted and tuned Schaffer Archery Opposition arrow rest gives you clean, repeatable arrow flight. Work through height, centering, paper tuning, and full-draw checks in order, changing one setting at a time. Keep a written record of your settings so you can return to a reliable setup quickly.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our target archery guides, checking product details against manufacturer specifications and owner feedback.

About the author

Ethan Brooks
Ethan Brooks

Ethan Brooks writes reviews and buying guides for Archery Society.