What Is a 2nd Axis Bow Sight and How Do You Set One Up?
Learn what a 2nd axis bow sight is, why it matters for accurate aiming, and how to set one up and tune it step by step for better groups.
Updated November 2026
A 2nd axis bow sight is a sight that can be adjusted on a second, separate plane from the main elevation and windage settings. It lets you tilt the sight housing so the pin stays level with the arrow’s flight path when you shoot from uneven ground or at steep angles. Most archers use it to correct for cant, or a bow held slightly off vertical.
Why a 2nd Axis Adjustment Matters
A standard bow sight moves up and down for elevation and side to side for windage. Neither adjustment fixes a sight that is rotated out of plane. If the bow is canted even a few degrees, the pin sits off the target line, and the error grows with distance. A 2nd axis adjustment corrects that rotation, so the sight pin and the arrow share the same vertical plane.
Shopping for one? See our guide: Bow Sights with Rangefinder: 5 Best Picks Compared (2026).
Shooters who hunt from treestands, shoot on slopes, or practice in the field tend to notice the problem most. Owners often report that a sight that appears to be aligned on flat range ground drifts off target when they tilt the bow to reach a shot.
Factors That Affect Your Setup
Before adjusting anything, check these points:
- Bow alignment: The riser should be vertical when you hold the bow at full draw. Use a bubble level on the riser or a plumb line to confirm.
- Sight mounting: The sight bracket must be secure. Loose hardware lets the housing shift during the shot. The guide on mounting a bow sight covers proper torque and seating.
- Sight pins: Pins should be parallel to the riser at the start. If a pin tilts, the 2nd axis adjustment will not solve the problem.
- Consistent anchor: A changing anchor point or peep position can look like a sight error. Lock in your anchor before you tune the sight.
Step-by-Step: Setting Up Your 2nd Axis Adjustment
- Set the bow on a stand or hold it vertically with a level on the riser. Confirm the riser is plumb.
- Shoot a group of at least six arrows from a fixed distance, such as 20 yards, with the bow held vertical.
- Look at the group relative to the target center. If the group is consistently tilted, note the direction.
- Loosen the 2nd axis lock screw slightly. Adjust the sight housing a small amount in the direction needed to bring the pin into line with the vertical.
- Retighten the lock screw. Shoot another group to check. Repeat in small increments until the pin and the arrow group line up on the vertical.
- Once the 2nd axis is set, return to elevation and windage tuning as normal.
Work in small steps. Large changes make it hard to know which adjustment helped. If your sight manual gives specific torque values or adjustment limits, follow those. For questions about your particular equipment, a certified archery pro shop can check your setup in person.
What We’d Use
A bubble level that clips onto the riser helps confirm the bow is vertical before you tune. View on Amazon
A bow sight with a built-in 2nd axis adjustment gives you the most direct control over cant correction. View on Amazon
FAQ
Do I need a 2nd axis adjustment if I shoot only on flat ground?
Not always. On flat range ground with a vertical bow, a standard sight may be enough. A 2nd axis adjustment becomes more useful when you shoot from elevated positions or tilt the bow to make a shot.
How do I know if my bow is canted?
Hold the bow at full draw and check the riser with a level. Then shoot a group. If the group leans consistently in one direction, cant is a likely cause.
Can I adjust a 2nd axis sight while hunting?
It is better to set and lock the adjustment at the range. Field changes can throw off your sight picture, so confirm your setting before the hunt. Check local regulations and your state wildlife agency for any rules about hunting equipment.
Related reading
- Xero A1i Pro Bow Sight: Setup, Pin Tuning and Tips for New Archers
- What Is the CBE Tactic Hybrid 1-Pin Bow Sight and Is It Right for You?
- What Is a Sight Master Bow Sight and How Do You Set One Up?
- What Is a Dead Ringer Bow Sight and How Do You Use One?
- Universal Bow Sight Magnifier Lens: How to Choose and Use One (Step by Step)
Ready to choose one?
